Releases for 09/05/2019

Campfire Audio IO

The newest release from Campfire Audio comes in the form of the Campfire Audio IO, a garnet-coloured IEM with dual balanced armature drivers. The IO features a detachable silver-plated copper cable with smoky tangle-resistant jacket and updated Beryllium copper MMCX connectors. You can also expect the array of accessories you expect from Campfire Audio.

Campfire Audio Polaris (2019 Edition)

Campfire have updated the legendary Polaris IEM for 2019, aptly titled… yes, you guessed it: the Polaris 2019 Edition. Campfire kept the basic setup of the dual drivers, but everything else has been reworked from the floor up, including the drivers themselves.

Campfire Audio Andromeda

Campfire’s iconic green anodized IEMs, the Andromeda, have gotten a few tweaks for spring 2019, including a cable update, fresh new accessories, and a change to the connectors. Also given a boost is the earhook design which sees Campfire rid itself of the memory wire previously housed in the cable itself.

Etymotic ER2-XR

The Etymotic ER2-XR extended response in-ear isolating earphones deliver Etymotic’s iconic passive isolation to block out up to 35dB of background noise. This means you won’t have to blast the volume to appreciate the ER2-XR’s full bass response and detailed sound.

Etymotic ER2-SE

These guys look similar to their cousins, but the ER2-SE is a powerful flat-response in-ear perfect for studio professionals. It’s called the ‘Studio Edition’ for a reason! No range is altered, giving a crystal clear representation of the original sound.

Oriveti OH300

Oriveti is dropping two shiny new IEMs, the first of which is the Oriveti OH300. These triple driver IEMs give a beautiful clear, balanced, neutral sound and look incredibly sleek and impressive. Probably the IEMs Batman would own, if he needed to hear crystal clear audio of himself delivering brutal one-liners.

Oriveti OH500

The Oriveti OH500 houses five drivers (quad balanced, single dynamic) within its gorgeous resin exterior. With those, you get an unfailingly smooth response with some strong low end. Their handcrafted cable of eight-strand braided silver plated wire is second to none, but still detachable for your convenience.

The post New Products Now In Stock appeared first on HiFiheadphones.

Now availiable, both The Dita Audio Answer, and the Answer Truth Edition are availiable to buy on Hifiheadphones. Or if you need to audition them before purchase, you can book an appointment at our demo room on the south coast near Brighton.

The Answer – Price – £399.95

The Truth Edition Price- £599.95

The Answer (Truth Edition) is a new high end in ear headphone from DITA. They have teamed up with Van Den Hul cables to create the ultimate earphone. “Ultra High Resolution”, “State-of-the-art”, and “Cost-No-Object” were just some of the ideas that went into designing these in-ears and it really shows – these are certainly ones to look out for!

Main Features

• 1 Ultra-wide Bandwidth 10mm Transducer
• Impedance – 16 ohms
• Sensitivity – 102 db
• Customised cable made by Van den Hul

The post New DITA Audio Answer Truth Edition appeared first on HiFiheadphones.

Hifi Headphones Rating – 9 out of 10

Price – £46

Buy Shure SE112 In-Ear Sound Isolating Earphones here

Pros

• Comfortable
• Nice rounded capsule housing design
• Non-removeable cable – similar in build to that of Shure’s other cables
• Good level of bass and detail
• Can be worn with the cable up or down
• 2 year warranty period

Cons

• Some may find the cable a little ungainly for a budget in-ear
• Capsule housing can stand proud of the ear when worn

Summary

Shure has obviously been looking at how the in-ear market has been developing; the popularity of the sub-£50 in-ear headphone has inspired a new addition to its esteemed lineup in the form of the SE112.

As can be expected, the included accessories are basic and limited in number. There’s 3 pairs of eartips (S,M & L) and a wax loop tool for maintenance. Also there’s a little velour draw-string bag for storage.

Key Features

• Impedance 16 Ohms
• Sensitivity 105 dB
• Dynamic microdriver

The Shure cable features a right-angle jack, much like other higher-value models; strain reliefs are moulded as part of the capsule housings in keeping with the rounded look of the SE112.

First Impressions

Shure has taken a departure from their usual in-ear designs; previous housings have been designed to sit fully in the ears’ conchas. The SE112 is similar in its rounded and shaped style but is appreciably smaller; isolation is not affected however, these really take down the volume of everything around which might compete for the wearer’s attention.

Sound Quality

The SE112 compares favourably to similarly-priced equivalents. They have a warm, smooth bass without being boomy, and have a clear midrange. Higher frequencies are rolled off a little. When compared to the scene-stealing SoundMAGIC E10 of recent years, the SE112 is certainly a contender.

The sound is much like that of the E10 but differs slightly; there’s a little more high-frequency rolloff (but not much), however what appeals to me is the low-mid or upper bass area, there’s a lovely chunky-silky quality to it which I always enjoy when listening to 70s rock and library music.

Verdict

The SE112 is a very likeable earphone for its modest price; the build quality is reminiscent of higher value models and they are very comfortable. The isolation renders me virtually incommunicado.

Shure has stuck with its 2 year warranty which pushes up the value for money aspect somewhat, not that any part of the SE112 is weak or looks vulnerable to accidental damage.

My verdict is that I’m buying them right now!

The post Shure SE112 In-Ear Sound Isolating Earphones Review appeared first on HiFiheadphones.