The M8 adopts a brand new system of interchangeable headphone sockets, developed by Shanling themselves. This system makes it possible to provide all the needed connection standards, while keeping cleaner looks and a better optimized internal design. Four different options are available and come supplied with the M8 – 2.5, 3.5, 4.4 and 3.5 pro.

With a massive 7000 mAh battery, the M8 can manage up to 14 hours of continuous playback once fully charged. The M8 also comes with a bigger, brighter and sharper screen than their previous models – for an even better user experience in all conditions.

The analogue circuit of the Shanling M8 was designed around a pair of high-performing AKM flagship DACs, with in house developed I/V conversion stage and fully balanced amplifier. Offering reference class performance, while keeping to Shanling’s smooth, pleasing and slightly warm sound.

Qualcomm’s Bluetooth 5.0 chipset assures stable connection and low latency. And the best sound quality is achieved thanks to the support of advanced Bluetooth Codecs.

Transmit: LDAC / LHDC / aptX HD / SBC

Receive: LDAC / LHDC / aptX HD / aptX LL / aptX / AAC / SBC

Features

• Hi-Res Audio + Hi-Res Wireless Audio certification
• Perfect match for all headphone types
• Equipped with top of the line AKM AK4499EQ DACs
• Interchangeable socket system with 3.5mm, 2.5mm, 4.4mm and 3.5 Pro
• 24GHz/5G Wi-Fi streaming with MU-MIMO technology
• Wirless file transfer, remote control, DLNA, airplay and OTA firmware updates
• 5-inch full HD touchscreen
• 14 hours continuous play on single charge + QuickCharge
• Graphite cooling system

The Shanling M8 is available to buy now for £1649

The post Shanling release new M8 digital audio player (DAP) – Now available appeared first on HiFiheadphones.

The M2x follows in the footsteps of most other Shanling products, a curved body with tempered glass on the back and the touchscreen on the front. The buttons on the side control FF/REW/Play-Pause and the wheel on the other side functions as a volume control and power button. On the bottom you have the 3.5mm output, 2.5mm balanced output and USB-C connector. Overall the M2x is a small, solid and well-designed player that feels great in the hand.

The mix of tempered glass and aluminium make the M2x feel solid and well build, although with all that glass it is advisable to get a case for it. All the sockets are tight and I cannot find a single issue with the build quality.

Features:

The M2x is first and foremost a portable player that supports high-res audio, PCM up to 32bit/384kHz and DSD up to DSD256. The M2x like its siblings, relies on external storage in the form of a single MicroSD card slot.

The M2x has Bluetooth with all the latest high-quality codecs including AptX and LDAC, along with AAC and SBC, it can also be used as a Bluetooth receiver should you wish to use it as a DAC/Amp between your phone and your wired earphones.

It can be used as an external DAC when plugged into a computer, it can also output digital audio via its USB-C port allowing it to be used as a digital transport.

You have WiFi for OTA updates along with Tidal online support, sadly there is no Tidal Offline support like on the M5s.

The touchscreen is easy to use and responsive, with all the usual options like customisable EQ, High/Low gain, shuffle/repeat mode. You also have line-out mode when you want to connect it to an external amplifier. Battery life is around 8-10.5 hours depending on the volume and output you are using.

One of the best things about the UI is the fact you can select what icons you want, and which you want to hide. This makes it easy to customise to your tastes, and makes it easy to find Album/Artist/Tracks etc…

Sound:

The M2x is exceptionally clean with virtually no hiss even with sensitive in-ears like the Andromeda. The low gain setting should be more than enough for most in-ears and sensitive over ears, yet in high gain the M2x does a very respectable job at driving harder to drive loads like the Sennheiser HD6XX series. Shanling have done an excellent job at implementing the AK4490 with a complementary amp circuit to bring out a natural and clean sound that really does sound better than its price would suggest.

Shanling may have packed the M2x full of features, but plug a pair of headphones in and you can hear that they have not forgotten about the sound quality, with excellent extension on both ends, plenty of resolution and layering and a neutral sound stage. It doesn’t have the hyper revealing nature of some top end players, yet it does not sound veiled or congested like some of the lower priced models can.

The M2x is honest, it presents the music in a neutral, detailed yet ultimately fairly neutral way that is enjoyable without becoming fatiguing. You can change the EQ if you wish to alter the sound, along with changing the digital filter which will bring about very subtle changes in the sound.

Conclusion:

For £199 the M2x is pretty much the perfect portable player for general daily use, it lacks the streaming capabilities of more expensive devices but it has a neutral and detailed sound backed up by a powerful internal amplifier and clean background. There is a lot of functionality, yet the sound quality has not been forgotten, it really is an impressive little DAP.

Build Quality: 5/5

Features: 5/5

Sound Quality: 5/5

Value: 5/5

The post Shanling M2X Portable Player Review appeared first on HiFiheadphones.

Cowon is known as one of the first companies to produce portable digital audio players (predating the iPod by a year with their CW100 model from 2000) and so they have quite a heritage in this area. Is the Plenue D player able to pick up the mantle of its forebears, and does the ‘D’ stand for ‘Dazzling’ or ‘Dunce’? We take a listen…

Pros:

• Good, customisable sound
• Small size is good for hands and pockets
• Attractive look

Cons:

• Short delay at power on (music database check)
• No case included

Design and Appearance

The Plenue D is a very small player at 2″ x 3″ (52mm x 75mm) and is all black, apart from its silver top and power button, all of which gives an impression of stylish utilitarianism. Edges are slightly bevelled making it comfortable in the hand, and it’s quite easy to operate whether you’re left or right-handed.

Being a touchscreen operated player, the power button can be pushed with music playing which disables the screen. On the right side there are buttons for volume and track skipping with an extra play/pause button. Just remember to disable the ‘button lock’ option within the player so all these buttons function when the player is in use and the screen is disabled.

There is only one slot for a Micro SD card and the Cowon Plenue D can only accept up to a 128Gb capacity at this time, but larger cards may work with future firmware updates. Just now, a 128Gb card is recommended as the Plenue D will hold, but will not allow you to access music which is outside of this 128Gb capacity. However there is also an internal memory of 32Gb on the Plenue D, if you need a reserve.

The Plenue D is a basic player which forgoes Bluetooth, wifi and the installation of apps such as Spotify; it’s a good choice for anyone who just wants a decent player for their own music collection. Why pay for features you’ll not use?

One issue is that the player checks for any new music whenever it’s turned on. This is typically finished after about 10 seconds, but can be a pain if you just want to start the player up and get on with things. Also when scrolling through tracks, the display can lag a little but it’s not a serious problem.

Durability and Build Quality

The Cowon Plenue D is a solid little device; the side buttons have a good ‘clicky’ feel about them and there’s nothing much else to say about build quality. It’s perfect. Perhaps it’s just as well, as there is no protective case included; it would have been nice to see one.

Sound

The Plenue D has a fairly neutral sound, but with a touch of warmth about it. It can help tame models such as the Shure SE846 which can be a bit lively with the bright filters, for example. Extensive EQ settings are available as well, including an almost paragraphic-level EQ section within the settings so you should be able to get the sound you’re after without too much bother.

Being a portable player, the Plenue D is designed for low-impedance earphones and headphones; a separate amp will be required for use with models over about 80 ohms impedance, depending on sensitivity.

Summary

For a basic low-cost player, the Cowon Plenue D is a good choice. It does all that’s needed, and it’s clear that the Plenue D comes from a company which knows its stuff!

The post Cowon Plenue D DAP Review – Cowon and Treat Yourself appeared first on HiFiheadphones.

Acoustic Research M2 Review – Android on Steroids

Acoustic Research is one of those old names which has been connected with the world of hi-fi for some 63 years now, although it has changed hands a few times since. Responsible for quite a few innovations over the years, can this brand offer anything new to music fans in 2015? Fully equipped with Wi-Fi capability, the AR-M2 can work with streaming services such as Spotify; so now we’re not limited to the tracks we have stored on our players.

Design and appearance

The M2 is a relatively large and weighty player, with the front side almost completely composed of glass; a fair amount of which is the touchscreen (62mm x 110mm to be exact). The back of the player is bevelled and it settles in the hand well. Its angular form and dark glass screen is reminiscent of a 1980s coffee table, but only a little one.

Key Features

Given the M2 is an android-based player, there’s a fair amount of customisation possible – there’s no bloatware or anything to get in the way, but users can always add items they wish to use. Spotify was installed without a problem, for instance.

Other than the touchscreen, there are 4 buttons on the side for track control and power on/off and a volume wheel on the top. Outputs are limited to headphones and line-level output. There’s a little sliding door for micro SD cards if the internal 64Gb isn’t enough for your music collection, and of course a slot at the bottom for connecting to a computer via USB.

The player can be ‘locked’ for when it’s playing whilst in a pocket or bag; however the buttons on the side still function so there may be some issues there. The volume control wheel on the top is still sensitive when the M2 is locked so again, care is needed.

The player was taken outside on one of the brightest days we have in the UK (we do get bright days) and with the settings adjusted for maximum screen brightness, the screen was clearly legible. The only problem is the fingerprints on the vast expanse of screen which are also clear to see.

The Dac within, a Burr-Brown PCM1794A offers up to 24-bit/192kHz playback and supported formats include DSD, WAV, AIFF, FLAC and ALAC.

Being Android-based, streaming services such as Spotify can be installed on the AR-M2 for use over local wifi networks, making this player more useful still.

Durability & build quality

As alluded to above, the M2 is solidly built and gives the impression of something which will last for a good few years. The back does have a hollow ring to it when tapped with a fingernail, but it doesn’t feel hollow or flex with pressure.

The M2 will be fine in a trouser pocket, but tight trousers might not react too well. Bend over and you might gore yourself – the design is strong and unyielding! The M2 comes with a velvety pouch for protection – ostensibly for the player itself, but it might help avoid the odd nick or scratch elsewhere too.

The buttons on the side of the unit for play controls can be operated even when the unit has gone into standby/hold mode, so fishing the AR-M2 out of a pocket may cause an unintended change of track. Also, the volume control can be operated while in this state. Although it’s firm, it’s loose enough to be operated by material brushing against it in the tight confines of a pocket or bag.

Sound Quality

There’s no question about the power available within the AR-M2; with a HiFiMAN HE-6 attached, volume gets up to a respectable level – even a little too loud for sustained listening, depending on the genre. Likewise with the Audeze LCD-3.

With IEMs such as the Dita Answer (Truth Edition), the AR-M2 is in its element with well controlled bass, excellent space and detail in the midrange, and a rich airiness which brings the best out of both the music and the earphones.

Within the supplied AR player app, EQ settings are possible with many genre-based presets but there’s a limit to the control possible with the rudimentary 5 band on there. This can always change with future updates, however the unadulterated sound of the AR-M2 is perfect.

Pros:

Fast, responsive touchscreen
Large internal memory
Can run apps such as Spotify

Cons:

Side buttons can be pressed while unit is on ‘hold’
Volume control can be accidentally operated

Summary

The Acoustic Research M2 (or AR-M2) is a fantastic sounding player which is well worthy of a position at its price point. Holding it gives the impression that it’s a serious bit of kit, despite all the fun it gives. It has enough power to drive all commonly used headphones well; even 600 ohm cans with sensitivity below 90dB. The large internal memory and the adaptability offered by the Android-based operating system make this a very nice pocketful, although a large one. It’s definitely one for a jacket pocket or bag.

Please take a look at our video review below for more details.

The post Acoustic Research M2 High Resolution Audio Player – Expert Review appeared first on HiFiheadphones.