Tag Archives: hifiheadphones

What are custom in-ear monitors?

Posted on by
Reply

What are custom in-ear monitors?

Essentially custom in-ear monitors are, as the title suggests, custom made earphones that are moulded to the shape of your ear. Everyone’s ears are different, and to really achieve the most comfortable fit, along with the best isolation, you have to go down the custom route.

 

Where to start?

So, you are thinking about going down the custom route, first up is the usual research and reading of reviews to shortlist some potential models. The custom industry has grown massively in the last few years, and they are no longer reserved for touring musicians, and there are easily as many audiophile models as there are pro-audio models now.

 

A few of the main brands are:

  • 64 Audio
  • JH Audio
  • Ultimate Ears
  • Empire Ears
  • Cosmic Ears
  • Custom Art

 

Once you have shortlisted some, it is worth looking to see if anywhere near you has demo models you can go and try out. As once you have the custom version, you won’t be able to return them.

 

Next you will need to get some ear impressions done, this is one of the most important parts of the process, due to this we would advise you spend a little more and get them done by someone who is highly qualified in taking ear impressions for musicians. Alternatively most brands will have a list of recommended audiologists, the process is not painful, but it is a bit odd if you have never had it done before.

 

First, they will check your ear canals are clean enough to take the impressions, and then they will insert a foam stopper past the 2nd bend of your ear canal. Then a 2-part silicone mixture is mixed and inserted into a syringe. You are usually given a bite block to take an open mouth impression (recommended for custom monitors) and the mixture is then injected into your ear and fully filling the outer part too. The silicone takes about 5-10 minutes to cure, then the impression will be removed and you are done.

 

 

Now you have your impressions, it’s time to design your monitors (or vice versa)

 

To be fair, you can order your monitors and then get ear impressions, either way the end result is the same. It is however best to send the impressions sooner rather than later as they do change if kept in storage, reducing the likelihood of getting a good fit the first time round.

 

You can go on to most manufacturers websites and design your monitors with their online design tools, these are great fun to use and the number of options varies depending on the brand. A lot of them also allow you to upload artwork if you want a specific logo on them. Take your time and make sure you pick a design you love. There are companies like Custom Art that are happy to surprise you if you don’t know what design to go for, they do some incredible pieces.

 

 

Now the wait…..

 

Your customs arrive, you are keen to try them out, but wait, how do they fit in?

 

Most brands include a leaflet to help you, but there is a technique to inserting custom monitors, you have to twist them in until they lock into place. Here is a great guide on the fitment of Custom monitors: https://theheadphonelist.com/custom-in-ear-monitors-fit-guide/

 

Now you have your own unique earphones that with some care will last you years and give you excellent sound quality, along with increased isolation and comfort when compared to universal models. Happy listening!

Effect Audio Leonidas II Upgrade Cable Review

Posted on by
2

Effect Audio Leonidas II

 

Aesthetics and Build quality:

The Leonidas II is one pretty cable, with a soft outer jacket and silver colouration it looks really amazing in the flesh. The jack has a carbon fibre housing, the y-split is silver and leather, and the 2-pin connectors are just sleek silver. I really do love the look of the cable; it definitely stands out as the silver has quite a unique sparkle in the sunlight.

Build quality is superb, from the PSquared jack to the 2-pin connectors everything is flawless. The braid is consistent and everything just feels really premium and well made.

 

Comfort:

The Leonidas II uses 26awg wires in a soft jacket, along with a consistent braid and moulded earhooks rather than stiff memory wire. All of this makes the Leonidas II an extremely comfortable cable in use, it is also a very quiet cable, with minimal if any cable noise.

Sound:

The Leonidas II is not a cable that brings noticeable changes in the lows/mids/highs, rather it focusses on how the detail and soundstaging effects are portrayed. The Leonidas II places a firm focus on creating a very accurate and wide soundstage, yet it also manages to add an element of increased resolution.

This increase in resolution doesn’t come across as added brightness though, it still remains a smooth a natural sounding cable. The Leonidas II will pair with many different monitors, with a black background and impeccable imaging and soundstaging. This cable never makes you feel like anything has been sacrificed to create the improvements, it keeps all the core elements of the sound of your monitors, but the increase in detail and spaciousness are instantly recognisable.

This is definitely a cable you can hook up and forget about, it doesn’t jump out at you with exciting elements, however it has a very mature and resolving sound that is about pure enjoyment.

Conclusion:

The Leonidas II is a perfectly balanced, highly resolving and all-round excellent cable. It is one that will pair well with most IEM’s, bringing out the best of their technical capabilities without making anything stand out.

Sound:  5/5

Comfort: 5/5

Build: 5/5

Value: 4/5

 

You can find our whole range of Effect Audio cables here

 

Sennheiser Momentum True Wireless Review

Posted on by
Reply

Momentum True Wireless

Aesthetics and Build Quality:

The Momentum True Wireless look great, with a matte black body and textured aluminium faceplates. A lot of the lower end true wireless models look very generic and cheap, whereas Sennheiser have made sure these have a modern and simplistic look to them.

The build quality feels excellent too, with a sturdy body and great case there is nothing to go wrong. Providing you don’t drop them too often; I have a feeling these will last you a while.

Features and Comfort:

The little case they come with is really compact and charges them securely, with magnets holding the earphones in. It takes a while to get used to how the touch features work, but the manual explains it all and once you have used them for a bit, they become quite easy to use. The main thing is that the connection is stable, I haven’t had any drop-outs when in use unless I am a long way away from the transmitting device.

Comfort is great once you find the right ear tips, they stay securely in my ears and are very comfortable due to the rounded edges of the housing.

Sound:

Bass: The Momentum TW has quite impressive bass response, with a nice dose of added body which gives the sound a pleasant warmth. The bass is not necessarily the tightest out there, but it does a respectable job of keeping up with more complex tracks, along with having enough extension and impact to keep most people happy. The added body these have is great as when you use them in noisy environments you will still be able to hear every beat.

 

Midrange: The midrange is a little bit recessed, but there is enough presence to stop them from sounding overly V-shaped. Guitars have great tonality to them; however, vocals don’t quite grab your attention, lacking a bit of clarity. The midrange doesn’t really do anything overly wrong, but they do lack detail and come across a little muffled at times.

 

Treble: The treble comes across with good clarity but in a polite manner, never becoming overwhelming. They have quite good presence without any nasty peaks, there is a smooth and controlled nature to the treble that is very easy to listen to. They have just enough bite to prevent them from sounding overly dark, and they do extend with relative ease but this is hindered by Bluetooth codecs somewhat.

 

Conclusion:

The Momentum true wireless are the best true wireless headphones I have tested so far, with stable connectivity and good sound quality. Wired earphones at this price do still offer better sound, but at the cost of convenience. With a full-bodied sound that still offers a good level of detail, the Momentum True Wireless are actually quite impressive considering all that goes in to them.

Sound:  4/5

Features: 5/5

Comfort: 5/5

Build: 4/5

Value: 4/5

What are USB earphones?

Posted on by
Reply

Some of you may have seen that there are a few earphones sporting a USB-C connector, or even a Lightning connector for Apple devices, but how do these actually work?

 

 

Well, all devices that have a headphone jack have internal circuitry that uses a DAC (digital to analogue converter) and then a headphone amplifier. The quality of these components varies a lot between devices, but most suffer from a certain amount of noise and hiss that is detrimental to the overall sound quality.

USB-C or Lightning earphones have this circuitry built into the connector itself, meaning the phone sends the digital data to the earphones and the conversion is done there. This gives the earphone maker a chance to match the specific circuit to a specific pair of earphones/headphones for optimal power and quality. This also means that the circuit is detached from the main board which is a common source for interference and noise.

Whilst not as common as Bluetooth models, USB earphones are on the rise and are an excellent choice if you have a device that has no headphone jack. They offer better sound quality than Bluetooth models along with being more convenient than using a dongle or external DAC/Amp.

Within our range of headphones, we have the new SoundMAGIC E11D which includes a 24bit capable DAC, along with a 4-core cable for balanced signal transmission. These have been getting great reviews in the press, being some of the best USB-C earphones available on the market.

 

 

If you don’t mind adding an extra device to get that extra bit of quality out of your regular wired earphones, then take a look at the Cyrus SoundKey. This little DAC/Amp gives you a great step up in clarity and control.

Oriveti OH300 and OH500 First Impressions

Posted on by
3

Oriveti OH300 and OH500 First Impressions

These 2 new models from Oriveti have just arrived in our office and will be available very soon. Due to the popularity of the New Primacy, we thought we should give you guys a quick first impression of them.

The OH300 is set to replace the New Primacy, sporting a new dynamic driver, along with the familiar dual Knowles balanced armature drivers. The OH500 is the new flagship model, sporting a dynamic driver along with 4 balanced armature drivers. Both come with a new 8-core braided silver-plated copper cable and leather carry case.

Both come with a cleaning tool, airplane adaptor, 3.5mm to 6.3mm adaptor along with an assortment of tips: S, M and L single flange silicone tips in 2 styles, along with 2 pairs of bi-flange tips and 2 pairs of M foam tips. Overall an excellent array of accessories.

Build quality is very impressive, Oriveti have now changed to a resin housing which is super smooth and makes them feel like a really premium product. The new 8-core cable is excellent and feels really durable, along with nice tight MMCX connectors. There really isn’t anything to fault here, both look and feel excellent.

The New Primacy always was quite a sensitive monitor, and these are no different so you may get slight hiss with certain sources, but it should be minimal. Pairing them with a good clean DAP is best though.

Sound:

The OH300 has a more neutral leaning sound signature, with excellent clarity and resolution. These are set to be priced around £300 and for that you get a really superb IEM. The midrange clarity is one of the main things that grabs your attention, with details coming across easily and effortlessly. The lows are tight and controlled but fill out the low end when required. They don’t bleed into the midrange, but they sound more coherent when compared to the New Primacy. These are not lacking when it comes to punch and extension, but they are those who like a bit of extra bass might want to look elsewhere. Up top you get great energy and sparkle, but they are a little less bright when compared to the New Primacy. They sound a little more refined without taking away the extension and detail that the New Primacy was famed for.

 

The OH500 has a slightly more organic tilt, favouring smoothness and slightly full tonality over a more analytical approach. The OH500 are one of those monitors you can put in and just relax, without missing out on technicalities. On the low end you get more pronounced sub-bass than the OH-300, but still a quick and tight mid-bass region preventing too much bleed into the lower midrange. The sub-bass is powerful and comes out of a black background when called for. The midrange is clean and has excellent layering, but it is presented in a natural way, without being pushed up front. There are no real peaks favouring male or female vocals, and the transition into the treble is incredibly smooth. The treble has a rise in the upper region creating a more airy, refined and extended sound rather than being more energetic and in your face. The soundstaging on the OH500 is truly superb, there is a really excellent sense of space with great placement of instruments.

 

These 2 models are definitely worth keeping an eye on, with the OH300 giving you a more neutral yet coherent sound, and the OH500 offering up a slightly lush but well extended and detailed sound. Oriveti are one of those brands who know how to tune a great earphone, so the competition better watch out.

SoundMAGIC P55 V3.0 Review

Posted on by
Reply

SoundMAGIC P55 V3.0

 

Aesthetics, Build Quality and Accessories:

The new P55 V3.0 have quite a mature and sophisticated look that is sleek and understated. The design is similar to a lot of on-ear headphones, they are not flashy but they have a fairly high end feel to them.

 

The build quality is top notch, with a mainly metal frame and detachable 3.5mm cable these are perfect for your daily commute. The cable uses a standard 3.5mm jack, so replacements will be easy to come by, along with the P55 V3.0 coming with 2 cables in the box anyway. These are a really solid on-ear headphone, especially for the price.

 

The P55 V.30 come with a carry case to keep them safe in your bag along with 2 cables, one with a mic and controls, one that is audio only. Also included is a Skype adapter for using them with a PC that has separate mic and headphone sockets.

 

Comfort:

These are not light due to the metal construction, but they are also not what I would call heavy. The clamping force strikes the right balance between providing a secure fit and not being tight and uncomfortable. The earpads are plus, and the headband doesn’t dig into the top of your head. These are not the kind of headphones you sit back for hours in a comfy chair with, but they are excellent for general use and I can easily wear them for a couple of hours.

 

Sound:

Bass: The bass on the P55 V3.0 is really punchy and has excellent body to it. It really does an excellent job of allowing you to hear and focus on the bass line of tracks, without masking details. Yes, the bass is slightly emphasised, but for on the go use this is an advantage, and the fact they never sound bloated is a huge bonus. The don’t just punch hard, they also dig deep into the sub-bass with ease. These are about fun, and they deliver on that promise, with a dynamic and engaging sound.

 

Midrange: The midrange sits slightly behind the bass in absolute presence, but it is far from being recessed. Vocals cut through the mix with great clarity, guitars have good tonality and everything is quite well presented. There is a little bleed from the bass which does affect the lower midrange a tiny bit but this is easily overlooked when the overall sound is this good. Female vocals do have a slight edge, due to a slight uplift in the upper midrange, but the transition into the treble region is fairly smooth with only a hint of sibilance.

 

Treble: The treble has not been forced to take a backseat on these, giving them a good sense of balance overall. The great thing about the treble on these is the way they are not boosted in the lower treble. There is not a focus on bringing out the initial impact, but more on bringing out air and extension in music. Every cymbal tap and crash is well defined, without sounding sharp.

 

The P55 V3.0 manage to handle everything you throw at them, they do not have a massive soundstage but the separation and spatial imaging makes up for this.

Conclusion:

SoundMAGIC have created a rugged, stylish and great sounding on-ear headphone for less than £100. The sound is full, fun and engaging. There is a bit of emphasis on the bass, but there is enough detail in the midrange, and presence up top to make them well balanced overall. These could be the best sub £100 on-ear headphone out at the moment.

Bowers & Wilkins Roundup

Posted on by
2

Bowers & Wilkins Roundup

 

We start off with the P3 Series 2 from Bowers & Wilkins, this is their entry level model but don’t be fooled by the price. These headphones come in a stylish and durable design that is perfect for everyday use. The lightweight build along with leather earpads means they are very comfortable, and the replaceable cable means you’ll get years of use out of them.

 

But the main thing that stands out is the big sound they produce from such a small headphone. Offering up a warm velvety sound that is effortless and enjoyable. They may not have the last word in detail, but what they do offer is pure pleasure, they immerse you in the music. Definitely a headphone to consider if you are looking for something low priced, lightweight and easy going.

 

 

Next up we have the P5 wireless, keeping the sound quality of the original P5 Series 2 but with the added bonus of no wires. The P5 Wireless are still the perfect size for everyday portable use, they just don’t fold up like the P3 Series 2. All their headphones share a similar mainly metal build, with leather earpads meaning the P5 wireless are still an extremely comfortable headphone. The Bluetooth is easy to pair and the button layout is intuitive, they also come with a cable in case you run out of battery.

 

The sound is big and bold, this used to be the house sound for Bowers & Wilkins before the Px was released. Plenty of punch and warmth down low, but with good detail throughout. The dynamics really standout and these will grab your attention and draw you in to the music. There is also greater depth with regards to sound staging over their smaller siblings, a worthy contender for your go to headphone of choice.

 

 

If you are looking for the ultimate travelling headphone, look no further than the Px. Released last year, Bowers & Wilkins packed a ton of tech into this stylish over-ear headphone. Active noise cancelling with the ability to tune what you want to cancel out via an App on your phone, sensors to automatically pause and play the music along with an excellent power saving feature. The Px really are quite impressive when it comes to features, but all of that means nothing if the sound quality isn’t there.

 

Luckily, they didn’t cut corners here, these are possibly the most detailed and clean headphones Bowers & Wilkins have made. Gone is the full-bodied sound of the P5/P7, and in comes the audiophile grade sound that a headphone of this calibre should have. Offering up plenty of detail with precision, but without a sense of fatigue, these really do bring out everything in the recording without skipping a beat.

 

JDS Labs Atom Review

Posted on by
1

Review: The JDS Labs Atom

 

Aesthetics and Build Quality:

The Atom is sort of built to be the new Objective2, and it sure looks better from an aesthetic point of view. The Atom is very simplistic, yet the curved edges make it look quite premium for the price. The overall finish and attention to detail is excellent, and it looks really neat sat on a desk.

 

The build quality is really good, it may not have a nice CNC machined chassis but everything is well finished and put together. The push buttons, volume control, inputs and outputs all feel great. I have no complaints about the build quality whatsoever.

 

 

 

Features:

The Atom incorporates everything the Objective2 should have had. Rear power socket and RCA inputs, front gain and input switch along with a ¼” headphone output. On the back you have both RCA and 3.5mm inputs, along with RCA outputs so you can use the Atom as a pre-amp when you don’t have headphones plugged in.

 

 

 

Sound:

As I have said the Atom was conceived as the next generation Objective2, so is it worthy of that title? In short, Yes, it is.

 

First off, we have the fact that the Atom is more powerful, nearly twice as powerful at 32 Ohms, so it can drive a wider range of headphones. But with this could come more noise, luckily the Atom shares the same black background and pure reference sound of the Objective2. The output impedance remains less than 1Ohm, so there are no issues using sensitive IEM’s with the Atom.

 

It is really difficult to describe the Atom, as it really doesn’t anything apart from amplify the sound. It doesn’t add its own character, and this is what JDS Labs were aiming for. Feed it with a good source and you have an excellent system on a budget. Either the EL or OL DAC would be the perfect partner for the Atom.

 

Lets just face the fact that the Atom does a lot right for the price, and I personally cannot pick any flaws in the design or sound of this little amp. I do not think anything comes close if you are looking for a neutral, uncoloured headphone amp under £200.

 

 

 

Conclusion:

The Atom sets a new standard when it comes to budget headphone amps, it has a clean and reference sound, with plenty of power on tap, it does justice to most headphones. All neatly wrapped up in a well-thought-out chassis, the Atom really is hard to beat.

Effect Audio Ares II vs Eros II Comparison Review

Posted on by
Reply

Effect Audio Ares II vs Eros II Comparison Review

 

If you are having a hard time trying to decide between the Ares II and the Eros II, we have written up a little comparison between the two. You cannot go wrong with either cable.

 

Aesthetics and Build:

These cables look superb, they finish is perfect and the braid is even, they are an excellent accessory for every on the go audiophile. They are not all about the looks though, the sound offered by both the Eros II and the Ares II is truly excellent for the price.

Both Effect Audio cables are built the same, with excellent quality jacks, a lightweight and slim y-split and soft over ear moulds that are much more comfortable than regular memory wire. The 2-pin connectors are sturdy, and the braid is tight and even, overall an expertly finished product.

Sound:

The Ares II is a lively and fun cable, the lows are still impactful and full but well controlled and not over the top. The midrange retains clarity and is not overshadowed by the slight increase in bass fullness. Where the Ares II goes against the typical copper sound is in the upper midrange/lower treble section, where it injects a little extra spakle and presence.
This makes this cable well detailed, but also fun and engaging to listen to. It pairs well with multiple IEM’s and if you are looking to get into the world of custom cables, the Ares II is the perfect place to start.

 

The Eros II paints quite a different picture, it leans towards the neutral side of sound and doesn’t go in to change anything drastic about the sound signature. What the Eros II does is increase the air between instruments, adding an extra layer of separation and allows the finer detail to shine through. The Eros II does add a tiny bit of presence in the treble, but it is not what I would consider a brighter sounding cable. The Eros II is clear, transparent and refined with excellent soundstaging.

Conclusion:

So there you have it, two beautiful cables both with different sound signatures. Which will be for you depends on synergy and what differences you want out of your current IEM’s. If you are in need of any cable pairing advice, give us a call!

Optoma Nuforce BE6i – Trendy Transmission

Posted on by
Reply

Optoma Nuforce BE6i – Trendy Transmission

Wireless earphones are commonplace now; so much so, it’s not necessary to draw undue attention to the fact these days. However, it’s nice to see differing styles coming along and the Optoma Nuforce BE6i is a smart addition to this earphone category.

Pros:

  • Nice case included
  • Many eartips and fitting accessories
  • Well tuned for many genres
  • Good build

Cons:

  • Charging port is a bit fiddly

Design and appearance

First impressions last, and in this case, the impression is definitely of a well-heeled smartness; these are the sort of earphones you can listen to during a job interview. The backs of the capsules are magnetic, so the earphones can be worn securely around the neck between uses.

The design lends itself to the ‘down from the ear’ wearing style so anyone wanting to have the cable going up, over the ear will need to consider an alternative model.

The case is a very practical, semi-rigid affair which is perfect for use with the BE6i.

Durability & build quality

Cable and control/battery construction is good with no obvious weak points. The capsules feel quite solid as well, without being too heavy.

Comfort

There’s not much to say here; once in, the earphones can more or less be forgotten about provided you have a good fit with the supplied eartips and accessories. There’s plenty to play around with, including some ‘fins’ which sit in one of the various folds of the ear and help keep the earphones in place.

Sound characteristics:

The Optoma Nuforce BE6i has a warm sound with a bit of non-intrusive treble presence, good as an all-rounder.

  • Bass

Bass has some emphasis, but the BE6i isn’t a bassy model per se. It extends well with good sub-bass at a realistic level and perhaps a bit more of a boost in the mid-bass region.

  • Mids

Mids on the BE6i are very clear and unaffected by the bass. Harmonics and other directional cues are well rendered and vocals are sweet and well textured.

  • Treble

There is a bit of sparkle about the BE6i; it’s not likely to cause any discomfort though. Cymbals are shimmery without straying into strident territory, and muted trumpets are just raspy enough. Detail here is very good for a wireless model.

  • Soundstage & Separation

Lower frequencies benefit from very good separation and give a good impression of bass width; this continues up the frequency spectrum making an impressive presentation for a wireless model. Harmonics are largely preserved, making for an engaging and enjoyable time with the BE6i!

Music genres good for and why

As noted above, the Optoma Nuforce BE6i is a good all-rounder. Some may prefer more bass than the BE6i has to offer, but this depends on previous earphones and expectations. The BE6i is great with current studio music such as pop and rock, with more refined genres such as classical doing very well also since the midrange is so clear.

 

Summary

The new wireless BE6i from Optoma Nuforce is as smart as it is nice-sounding, giving a good impression of your music and complementing your outfit a treat. With a large range of accessories to get a perfect fit, the BE6i is a superb wireless choice.

Etymotic ER3-SE and ER3-XR Earphone Review

Posted on by
Reply

Etymotic ER3-SE and ER3-XR Review

 

Not content with the splash it’s made with its updated ER4 designs of late, Etymotic is back with more! Or is it less? The ER3 models cost a good chunk less than their ER4 counterparts, so what does this mean in terms of value?

Pros:

  • Classic Etys for the price
  • Removable cable
  • Crystal clarity
  • Carry case

Cons:

  • Basic selection of tips
  • Etymotic deep fit not for everyone

Design and appearance

The ER3 versions are slightly more sensitive than the ER4 versions, with half the impedance too. This may have been done with an eye on the portable market, where some handsets may have struggled to get up to a good volume with the ER4 type.

Accessories are minimal with the ER3-SE and ER3-XR; along with the earphones themselves, we get a case and three pairs of tips. The two sizes of Etymotic triple flange, and a pair of ER38-14F type foam eartips.

Durability & build quality

The capsules are the most obvious change, with plastic-coated aluminium being used instead of the glossy metal look of the ER4. The cable has a good strong, but pliable feel to it, but it is a bit thinner and is not braided at the top. Apart from the slightly lighter weight and less glossy look of the ER3-version capsules, things are much as we’d expect from the ER4-XR and ER4-SR.

Comfort

No change here; Etymotics need to be inserted deeply to be at their best, and people either love the isolation they bring or hate the deep insertion of the eartips. Fortunately we love the isolation enough to ignore any initial discomfort, and the eartips seem to settle into place after a few seconds.

Sound characteristics:

Like the ER4 designs, there are two flavours of ER3. The Etymotic ER3-SE is the more strait-laced and neutral of the two, with the ER3-XR giving a little more bass warmth. Both however sound a little more gentle in terms of the midrange than their ER4 brethren. Where we sometimes get the feeling of jeopardy with the ER4 models, with an errant xylophone or female vocalist threatening to poke us in the ear, the ER3 versions are a little more laid back. Etymotic’s clarity has not been sacrificed though; the midrange presence is just a little more humane.

Bass

Sub bass on the ER3-SE gives a nice bit of wobble which is low in the mix, but there alright. The rest of the bass is as well controlled as expected, but understated; bass junkies need not apply. There’s some great control here though. Meanwhile, the ER3-XR has more of that skull-rattling sub bass and more slam generally. We’re still not in basshead territory, but if you like your sound a little warmer with more weight given to cellos and drums then the ER3-XR may be for you.

Mids

Mids are always a treat as far as Etymotic’s offerings are concerned, and the ER3-SE does not disappoint. While the midrange level is slightly lowered when compared to the ER4-SR, all the other attractive features are there along with a wonderful sense of spaciousness. Details are well rendered, though not with the sharp relief of the ER4-SR. Many will feel the ER3-SE has more comfortable sound when compared to the ER4-SR in terms of the sound, but with all its harmonic and spatial treats largely intact.

With the ER3-XR the extra bass presence vies for attention along with the midrange, so the midrange seems to lose its power slightly. The spaciousness of the ER3-SE is tempered, and the extra bass warmth takes its place. The ER3-XR is still excellent when it comes to midrange action and detail, but is arguably the better all-rounder of the two as the tuning works well with genres such as modern dance music.

Treble

The ER3-SE does not sound treble-heavy but there is some nice extension up top. If your recordings were made on analogue tape, you’ll probably know about it from the tape hiss coming through. Treble is at around the same level as the midrange after a smooth transition, and consequently does its job well whilst keeping the midrange in the spotlight.

The ER3-XR has the same treble presence as the ER3-SE, but the fatter low end gives the tuning a warmer feel.

Soundstage & Separation

With the detail and midrange clarity on offer from both these models, we can say that both soundstage and separation are a treat. The sound has a nice ‘out of the head’ feel without seeming unnatural and with good depth too. Separation and imaging are near perfect, if a bit toned down when compared to the dazzling ER4 designs.

Music genres good for and why

The ER3-SE is a great choice for acoustic music, classical and opera. With modern pop and dance genres, it can depend on your sensitivity to the upper midrange frequencies as to whether they work or not, along with your taste for bass. The ER3-XR is good for any genre you can throw at it, and we went through many!

Summary

Etymotic’s ER4 models are now available for cheap (albeit under the ER3 moniker), but their character is largely intact. Those who like to hear the smallest thing within their music needn’t study the fine print of credit card agreements in order to afford the ER3-SE and ER3-XR.

Whizzer A15 Earphone Review

Posted on by
Reply

Whizzer A15 Earphone Review

The Whizzer A15 are well worth considering for their £69.99 price; detailed and fun sounding, with great build quality make them a winner.

Pros:

  • Well balanced
  • Detailed
  • Separation
  • Soundstage

Cons

  • Highs are not the most refined
  • Cable is a little thin (replaceable)

Aesthetics, Build Quality and Accessories

The Whizzer A15 is an interesting IEM, with a brushed metal outer shell and the company logo stamped in black on it. They look and feel excellent for the price and have a nice slim profile.

Build quality is very good, especially considering the price. The outer housing is metal, the cable has a soft and flexible section of memory wire and is sheathed in fabric below the y-split. The cable is detachable and uses the popular MMCX connection, so you can use aftermarket cables should you wish. The cable has good strain relief, my only concern is it is a little on the thin side where it enters the section of memory wire.

Accessory wise you get plenty of added extras, first off you get a nice faux leather carry pouch which is small and perfect for storing the IEM’s in. Next you get a metal tip holder with a variety of ear-tips. You get S, M and L in 2 different types of single flange tips, and also a pair of S and L foam tips. The A15 have removable dust filters, and come with a pair of tweezers to remove the old foam, and 5 pairs of new foam filters. Overall everything you need is included, along with some bonus extras.

Comfort, Isolation, Cable noise and Driver flex

The A15 are really comfy, the housing has no sharp edges and the memory wire is supple and easy to shape. Once in they are secure and comfortable for all round usage. I do find the angle of the cable does slightly push them out of your ear and foam tips offer a more secure fit.

Isolation is quite average on the A15, due to the large vent on the inside of the housing. They would be fine for most general usage, but if you are looking to block out loud noises, a fully sealed IEM would be better.

Cable noise is not an issue due to the behind the ear cable routing.

Driver flex is not an issue, I believe this is due to the venting of the housing.

Sound

Bass

The A15 are tuned for fun listening, with a strong and punchy low end but without excess or bloat. The bass will satisfy most people and lends its hand to all genres well. The bass is well controlled; during rock tracks bass guitars are easy to follow, and kick drums hit with authority and good body. Acoustic has excellent body and warmth with good tonality, and EDM is just fun and energetic. The bass does not bleed into the midrange, and extends right down to the sub-bass regions with ease.

Midrange

The midrange has excellent bite and clarity, as stated the bass does not cause excessive warmth to the midrange adding only a hint of warmth to the lower midrange. The midrange is also not pushed back in the mix which can happen with some of the more fun sounding headphones out there. A highlight of the midrange is the air and separation, allowing everything to shine through with delicacy and detail. Luckily there isn’t an upper midrange peak, allowing them to be fatigue free with no sibilance.

Treble

The treble is well presented in the mix, not being subdued or left behind. There is a slight peak which gives greater presence to the lower treble region and they don’t quite extend as effortlessly as some more expensive models. But putting them up against similarly priced models, you will find these sound more complete than the usual warm bassy sound of others. Initial cymbal hits have excellent energy but are not sharp, and do not become too bright and fatiguing.

Instrument separation is excellent, the A15 never becomes congested through faster more complex tracks, and the soundstage is above average with great width. Imaging is convincing with good spatial cues and directionality.

Conclusion

The Whizzer A15 lends its hand to all music, and does a great job at being a good all rounder. Stick on some rock and they are energetic and fun, well recorded acoutstic and you can hear subtle detail and warmth. Presenting a well balanced sound across the frequency range, the A15 is a well built IEM for the price with excellent sound to boot.

Sennheiser IE80s Earphone Review

Posted on by
Reply

Sennheiser IE80S – An Old Classic Reborn

Sennheiser is a company which seems to have painted itself into a corner in recent years; how do they improve on the models they’ve had on sale for the past few years? It’s either a testament to their design teams of years past, or a damning indictment of the design team they have now. They’re recycling old designs, and adding an ‘S’ so we can’t pluralise without causing confusion. What trickery is this?

Pros:

  • Nice warm sound
  • Good assortment of tips and accessories
  • Carry case

Cons:

  • Could have more midrange clarity
  • Straight jack on cable

Design and appearance

A new version of an old classic is simple enough to achieve; round off the corners a bit more and you’re done! There’s probably more to it than that, but this new IE80S bears more than a passing resemblance to the original IE80. However it’s a good look, and Sennheiser obviously knows that it’s not necessary to have flashy designs or gimmicks to impress their fans.

The supplied case is sturdy and sleek, with a non-removeable foam insert which houses the earphones when not in use. Also there are plenty of eartips and accessories, such as a pair of earhooks if your cable keeps popping over your ears.

Durability & build quality

There’s nothing bad to write here, the Sennheiser IE80S is as expected with excellent build quality. The jack on the cable is a straight one which may be a problem for some; if you want a right-angle jack then spare cables for the IE80 will fit just as well.

Sound characteristics:

The tuning is what we expect from Sennheiser; there’s no drastic departure from the typical Sennheiser sound which is warm, with a smattering of treble to keep things interesting but staying comfortable.

Bass

Bass is fairly plentiful and should please lightweight bassheads; however the dials on the sides of the capsules can be adjusted to give a bit more grunt. Control is pretty good, but where it’s loose it feels as if that’s the way it should be. It’s loose with a touch of panache! Subbass is quite powerful if it’s in the music, and you’ll be in no doubt

Mids

The level of the midrange is lower than the bass, but pretty clear and enjoyable nonetheless. Harmonics are clear enough and there is no congestion here, but there is the feeling that the IE80S could do better; at least with the supplied eartips. Aftermarket eartips (such as Blackbird) seem to improve things in this regard.

Treble

Treble is gentle; we’re fond of a warmer sound but the IE80S still takes some getting used to. If you’re a fan of an airy, shimmery sort of presentation then the IE80S is not for you. If however you’re a fan of laid-back music then the IE80S is a contender. Plenty of detail is present though; it comes across as an extension of the midrange with a smooth transition.

Soundstage & Separation

Soundstage on the IE80S is pretty good for an IEM but there’s a lack of depth to the sound, apart from the bass which appears to spread out in front of the listener. Separation is good, but limited with the supplied tips. If you’re splashing out on the IE80S, then try some tips such as Blackbird or Spinfit.

Music genres good for and why

Due to the bass presence, the IE80S is best suited to dance music, pop and rap. Fans of classical, jazz and opera may still enjoy those genres with the IE80S but they will likely miss the airiness and the reverb ‘feel’ of the space the recording was made in.

Summary

Sennheiser’s souped-up IE80 design is here, and it’s an enjoyable listen for many modern genres but some may find the sound lacking air and space for genres such as classical.

Sennheiser HDV 820 Headphone Amplifier / DAC Review

Posted on by
Reply

Sennheiser HDV 820 Headphone Amplifier / DAC Review

Sennheisers new HDV 820 is a smooth, powerful and versatile DAC/Amp that is all about musical enjoyment and flexibilty.

Pros:

  • Smooth effortless sound
  • Detail retrieval
  • Versatility

Cons:

  • A little pricey for some

 

Aesthetics and Build Quality:

Sennheiser have gone away from the silver colour scheme with their latest products, opting instead for a matte black finish. In my opinion the products look a lot sleeker now, and the matte black aluminum casing of the HDV 820 looks superb. The LED status lighting is white and perfectly blends with the whole look.

The build quality is as you would expect from Sennheiser, flawless. The casing is superbly finished and put together, all the sockets are tight and have no play in them. I could not find a single fault with the build and finish of the HDV 820.

Features:

The HDV 820 can be used as a pure amp, pre-amp and also as a DAC/Amp. It has balanced and unbalanced inputs and outputs and supports DSD playback.

On the front panel you have a 6.3mm/3 pin XLR combo single ended headphone out, a balanced 4-pin XLR output and a pair of 4.4mm balanced pentaconn outputs. You also have the power button, source select knob and volume knob.

On the back you have the balanced analogue inputs and outputs, single ended analogue input, gain knob, and finally the optical, coaxial and USB digital inputs.

It is a very versatile unit that can be fitted into any system.

Sound:

The HDV 820 is plenty powerful for most headphones out there, and even does a decent job at driving the HiFiMan HE-6. It is no wonder that it pairs wonderfully with Sennheisers own HD800, bringing out plenty of body, dynamic punch and detail without becoming shouty. The HD800 sound smooth and effortless when paired with the HDV 820, a pairing that is revealing with heaps of detail but never brash or too in your face.

The highlights of the HD800 are accentuated by the HDV 820, offering one of the airiest and widest soundstages of any headphone, orchestral passages are simply sublime. The HDV 820 has no trouble with separating more complex tracks, offering up a textured and well layered sound.

The HDV 820 is not the most neutral and analytical sounding unit out there, it does have a certain smoothness to it but without taking away detail. It won’t become fatiguing to listen to, and is the perfect companion to the HD800.

Conclusion:

The HDV 820 is powerful and versatile making itself at home in any system. It pairs well with many different headphones and has a slightly smoother more laid back sound than some of the other more neutral amps. The HDV 820 is all about musical enjoyment, just sit back and enjoy the effortless sound of your headphones.

Questyle CMA400i DAC / Headphone Amplifier Review

Posted on by
Reply

Questyle CMA400i DAC/Headphone Amplifier Review

The Questyle CM400i proves that neutrality really works when it comes to an all in one desktop device. One that works well with sensitive IEM’s all the way up to full size planar magnetic headphones.

Pros:

  • Neutrality
  • Detail
  • Power

    Cons:

  • May sound clinical to some
  • No analogue inputs

    Aesthetics and Build Quality:

    The CMA400i is a sleek, matte black DAC/Amp which looks very professional and understated. There are orange LED’s on the front along with the outputs and volume knob; the inputs are on the back. It looks superb, but if you want to change the looks up a little you can buy an optional clear top cover to show off the internals. You can also get an optional desk stand that stands the CMA400i upright to save space.

    The CMA400i has a solid CNC machined aluminium shell and feels extremly well built. All the connectors are solid, the buttons precise and the volume control is super smooth. Questyle have made a superbly built unit here, with no flaws in the finish whatsoever.

    Features:

    The CMA400i is a DAC/Amp, and does not have any analogue inputs, for that you will need the CMA600i which offers a pair of RCA analogue inputs.

    The CMA400i has 2 coaxial inputs, 1 optical input and a USB input, so it can be used with a wide range of devices. On the back you have outputs that can be used as line-outputs to an external amplifier or pre-amp output to powered speakers. You get a pair of balanced XLR outputs and a pair of RCA outputs, along with a spdif digital output (USB to spdif converter use).

    On the front you have the 4-pin balanced XLR output, a standard 6.3mm singled ended output and a 2.5mm balanced output. This covers the most common single ended and balanced connectors. You have the volume knob and also 2 buttons, one to switch between inputs and one to switch between Amp mode (for headphone and pre-amp use), or DAC mode (DAC mode switches the outputs on the back to line-outputs).

    On the bottom you have gain switches, for standard or low gain, this means it can be used with a wide variety of headphones and IEM’s (standard is roghly 2.47x and low is roughly 1.1x)

Sound:

The CMA400i as a pure DAC is superb, it is one of the more detailed and neutral DACs out there not adding any sweetness to the sound. The separation is one of its strong points, and its ability to show up fine detail is also excellent. The DAC won’t smooth over imperfections in recordings, it is very revealing and presents the recording to you as it should be.

Going on to the amp section this is also a more neutral and revealing amplifier, one that could be used in a reference system. The CMA400i could sound cold and clinical to those that are used to smoother sounding amps, however it is not. It is revealing and will show up flaws in the recording, and it will let you hear the real sound of your headphones of choice.

The sound is tight, controlled and detailed, there is no added warmth so careful system matching is a must. The CMA400i is powerful enough for most full size headphones, yet also has a low gain option which can be used in conjuction with sensitive IEM’s and it has a 2.5mm balanced output. The resolution and detail of the sound is superb for the price, you will hear details you have not heard before.

Conclusion:

For an all in one unit the CMA400i is remarkably clean, crisp and detailed. It has excellent control and balance throughout the frequency range and is a great reference setup for testing headphones. It also makes a great desktop setup for most headphones, especially those that lean towards a smoother, warmer sound. Pairing the CMA400i with the Audeze LCD-2 for example really shows what they are capable of with a fun and punchy but not bloated sound. However pairing with the Sennheiser HD800 is perhaps a little too clinical for some tastes.