Periodic Audio Ni (Nickel) Headphone Amplifier Review

Periodic Ni (Nickel) Review

Aesthetics and Build Quality:

The Ni is about the size of a 9v battery, and looks very plain. All black but with the company branding in white on it along with white arrows showing the input/output sockets; sitting between these sockets is an LED. On the other end you have a micro-USB for charging, and that is it, no buttons or switches, just a block with sockets on it.

The build quality is superb, it may be made out of polycarbonate, but it sure is well put together. Tolerances are incredibly tight and the housing is very well put together, along with the fact that the 3.5mm sockets are tight and of very high quality. All of this put together makes the Ni a solid little amp that should easily be up to the task of daily use.

Features:

The Ni does not have an on/off switch or volume control, the sockets sense when a source and headphone are connected and power the amp on. Volume is controlled by the source, and the Ni has a fixed gain of 6.5dB. It will supply 150 mW into 50 Ohms, 250 mW into 32 Ohms, and 270 mW into 16 Ohms. This makes it suitable for most headphones that are used for portable use, and some harder to drive models too.

The battery charges from flat to full in only 30 minutes, and you can expect around 9hrs of battery life from a single charge. The input impedance is very high which means it almost totally bypasses the internal amp of your source. The sockets are TRRS so when you are using it with a mobile phone, mic and controls will still pass through to the phone. The Ni is also engineered to be nearly completely RF and noise interference free.

 

Sound:

Well Periodic have put a lot of thought into this tiny little amp, so you would hope the results pay off.

Well rest assured all that work didn’t go to waste, the Ni does exactly what it sets out to do without fault. Phone outputs are usually pretty poor, and this little amp really does bring an improvement, and not just in terms of volume.

 

It goes beyond that and you get a nice quiet background with very low noise, alongside an increased sense of control and responsiveness. Lows sound tighter and more articulate, the midrange sounds better separated and airy, along with effortless extension up top. Of course, a lot of this will depend on the headphones you plug in, but with the Ni you can use a wide range of earphones to headphones and get the same quality performance that a phone simple cannot give on its own.

 

The Ni doesn’t inject a signature of its own, it does not have any additional bells or whistles, it purely amplifies the signal. But it does so in a very clean and precise manner that is perfect for those with low powered sources or poor headphone outputs.

 

Conclusion:

If you are looking for a boost in power, or a step up from your phone’s headphones output, the Ni is the perfect solution for on the go use. With great battery life, quick charging time and excellent sound quality, what’s not to love?

 

Sound:  5/5

Features: 3/5

Build: 4/5

Value: 4/5

Shanling UP Portable DAC / Amplifier Review

Shanling UP Portable Headphone USB DAC and Amplifier

Up your portable audio game with the Shanling UP, with excellent detail retrieval and a wide soundstage, a must have for the audiophile on the go.

Pros:

  • Clarity
  • Size
  • Value for money

Cons:

  • None for the price

Aesthetics, Build Quality and Accessories

The Shanling UP is a tiny little device, the size of a memory stick, with a glossy black front and matter black rear. It has a USB tybe C socket on the top and a 3.5mm headphone jack output on the bottom, on the front an LED will light up telling you the device is on and what sample rate is playing. It is so simplistic and elegant it will fit into any system with ease.

The build quality is excellent with the glass front and the rest of the body being aluminium. Both sockets feel tight, and there is nothing on it to go wrong.

Accessory wise all you get is various cables, which is all that is needed. You get a lightning to USB C, USB C to USB C, Micro USB to USB C and a regular USB to USB C cable, so it covers most phones and PC use.

Ease of use

The UP does not have an internal battery, it just plugs into your device and runs as a DAC/Amp. It should work with most android devices that support OTG accessories, iPhones with lightning port and also PC’s. With the new Windows 10 creators update you no longer need to install drivers.

The devices has no buttons, thus you control the volume level via your phone or PC, I had no issues getting it to work with a Samsung phone, and a regular Windows 10 PC. It is recommended you use the Hiby music app when using the UP.

———————————————————————————————–

READ MORE: NuForce uDAC5 Portable Headphone DAC/Amp Review

———————————————————————————————–

Sound Quality

The UP is so clean, so clear it is hard to go wrong for the price. I am a DAP user, and don’t use my phone for music as I like having files stored locally. But the trend to not want to carry an extra device nowadays has grown and also Apple did away with the headphone jack so the market for portable DAC/Amps is booming.

There are plenty out there, but few that offer full DSD support and an ES9018 DAC chip for this price. The Shanling UP may only be able to output 35mW @32 Ohms, but it gets loud and driver easy to medium hard to drive headphones.

From IEM’s to portable full-size headphones you will be guaranteed to get much cleaner and better separated sound with the UP.

  • Bass

The bass is tight and controlled, with precise kick and good body to back it up, the bass notes also decay as they should.

  • Mids

There is no added body to the lows, this means the midrange is allowed to shine and it does, with vocals coming across clean with excellent detail retrieval. There is also plenty of air around notes which allows you to pinpoint each and every part of the recording.

  • Treble

The treble is well extended without any harsh metallic tone to it, what is best about the highs is their imaging, the placement within the soundstage is critical and this little device has managed to get it spot on.

Conclusion

The Shanling UP is a superb High Resolution DAC/Amp for portable use, if you have some good headphones, you are not hearing their full potential out of a phone. This will change that, the UP with give you the clarity, detail and soundstage that your phone simply cannot.

Even being used with a PC there is a substantial upgrade from the on-board audio, so this can be used on your morning commute with your phone, then plug it into your PC at work and enjoy the same quality of music.

FiiO E18 Kunlun Portable USB DAC & Headphone Amplifier – Announcement

The Hifiheadphones team is pleased to announce the new DAC & Portable Headphone Amplifier from FiiO, the E18 Kunlun is now available to be purchased on our website.

Enter the world of the professional audio decoder FiiO E18 with the convenience of listening to music from Smartphones, and the pleasure of high fidelity audio.

Reference quality digital-to-analogue audio conversion for music played via compatible Android smartphones. FiiO E18 is compatible with Samsung Galaxy S3/S4/Note2, HTC One, and other Android devices with USB OTG and USB digital audio output capabilities.

FiiO E18 can be used USB DAC and amp as replacement of the on-board soundcard on computers and laptops. FiiO E18 serves as a dedicated headphone amplifier when connected to portable audio players.

The user-friendly volume knob design with symmetrical volume roller is resistant to accidental bumps, yet easy to adjust. When used as power source, the automatic cut-off and self-recovery function of charging current limiter IC on the E18 protects the phone. The 3500mAh Li-polymer battery achieves 25 hours playtime when used as amplifier only, and 12 hours utilising the DAC and amp combination.

  • Performs reference quality digital-to-analogue audio conversion for Android smartphones
  • Compatible with Samsung Galaxy S3/S4/Note2, HTC One and Android devices
  • USB DAC functionality for computers and laptops
  • Works with laptop and desktop computers at up to 24-Bit / 96kHz high definition audio
  • High-end op-amp audio output circuitry with ultra low distortion and noise
  • 3500mAh battery for up to 25 hours of use as an amp-only, or up to 12 hours as DAC+amp
  • Charges in 4 hours with optional 2A USB adapter

To purchase the unit, please visit our website:

Buy FiiO E18 Kunlun Portable USB DAC & Headphone Amplifier

Cypher Labs Theorem 720 DAC – Announcement

The HifiHeadphones team is pleased to announce the new DAC & Portable Headphone Amplifier from Cypher Labs, the Theorem 720 is now available to be purchased on our website.

Cypher Labs latest creation, Theorem 720 DAC combines a fully integrated high-quality headphone amplifier with a high-end digital-to-analogue converter for PC, Apple and Android devices.

Delivering clean, high quality audio from iPod, iPhone, Mac or PC, the Theorem 720 DAC offers asynchronous conversion of the USB output, not only a pass through of the line-out. Two headphone outputs support single ended or balanced set-ups while a line level analogue output caters for connection to amplifiers or powered speakers. Volume gain settings optimised for all headphone types make the Theorem capable of driving even very demanding headphones with ease.

The large capacity replaceable Li-polymer battery charges Apple devices while playing up to 18 hours with a fast re-charge time of 4 hours. The battery features AC switching that is totally isolated for a clean power delivery.

  • Headphone amplifier and digital-to-analogue converter in one unit
  • Delivers uncompressed, high quality audio from iPod, iPhone, Mac or PC
  • High resolution audio up to 24bit / 192kHz
  • High-end AKM 24 bit DAC model 4396
  • Automatically detects computers or Apple Devices
  • Two headphone outputs support single ended and balanced set-ups
  • Line level analogue output to connect to amplifiers, powered speakers or home audio equipment
  • Volume gain settings optimised for all headphone types
  • Large capacity replaceable battery charges Apple devices while playing up to 18 hours
  • Fast re-charge time of 4 hours
  • Precision machined all aluminium enclosure for maximum durability
  • Lightweight and compact

To purchase the unit, please visit our website:

Buy Cypher Labs Theorem 720 DAC & Portable Headphone Amplifier

Graham Slee Voyager headphone amp – back in stock after long delays

The Graham Slee Voyager headphone amplifier is back in stock after a delay of some months. The delays, due to a shortage of the parts, has meant the Graham Slee portable headphone amp has been out of stock with many UK retailers for an extended period of time.

John Cadman, Graham Slee’s production manager, reported that the delays have been caused by a shortage of the Voyager case component. The case is manufactured outside the UK (in Canada) and the shortage of this one component has held up production.

About the Voyager

Graham Slee produced the Voyager headphone amplifier to be used with MP3 players, such as the iPod, and other portable audio devices. The Voyager amp simply plugs into the headphone output of the audio source and you plug your headphones or earphones into the Voyager’s headphone out.

Alternatively the Voyager can be connected to an iPod with a cable that connects directly to the iPod’s dock connector. This setup provides a better quality line level signal than the headphone output socket.

About Graham Slee

Graham Slee have a long standing reputation in the British audio world for producing phono pre-amplifiers (for vinyl record playing turntables) and high quality desktop headphone amplifiers, such as the Graham Slee Solo.

The Solo headphone amp is popular in broadcast and recording studio environments. The Voyager is the first venture into portable headphone amplifiers for Graham Slee and has been very well received by the audio and HiFi press.

More Information

For a range headphone amplifiers, including the Graham Slee Voyager, please visit the HiFi Headphones store.